TECH-SM2S

Applications

• Domestic water supply to waterworks
• Irrigation in horticulture and agriculture
• Drip and sprinkler irrigation
• Pressure boosting application
• Water treatment
• Civil and Industrial application

Product feature

• Easily rewindable (wet wound) induction motor with PVC/ Poly wrapped insulated winding.
• Water Lubricated Radial Bearing and High capacity Kingsbury type thrust bearing for 100% maintenance free operation.
• Corrosion resistance stainless steel stator jacket.
• Non-contaminating water filling design.
• High efficiency electrical design for low operation cost.
• Tropical zed design. (Lower winding temperature)
• Cable material according to drinking water regulation.
• All motors prefilled and 100% tested.
• Sand slinger for high performance in sand.

Specification

• 4″ NEMA Flange with M8 Stud.
• Water temperature: up to 45° C
• Minimum internal diameter of well: 4″ Ø100mm.
• Power Range: 2.2KW to 4KW (Three Phase) 0.75KW to 2.2KW (Single Phase)
• Power Supply: Three Phase 380V-415V ±10%, 50Hz
  Single Phase 220V-240V ±10%, 50Hz
• Insulation Class: F
• Protection Class: IP 68
• Max. No of starts per hour: 25
• Direction Of Rotation counter clock wise facing shaft end
• (Rotation Reversible for three phase Motor)
• Standard motor with poly wrapped insulated winding
• Speed: 2850 RPM
• Pole: 2 Pole
• Ambient temp of 30°C with a min. Cooling Flow: 0.75KW-4.0KW
• Installation position: vertical/Horizontal
• Duty: S1

Technical Data, 50Hz, 220V-240V, 2900 RPM